Digital Electronic Testers

Product Details:

Specification:
Features:
3 ½ Digits LCD Display
1999 Counts
Backlight
Data Hold
Auto Ranging
3 in 1 Insulation Resistance, Phase Testing & Voltage Testing
Technical Data :
Function
Range
Accuracy
Resolution
Insulation Resistance
0.1MW~200GW
±(3%+5)
10MW
Testing Voltage
1000V,2500V,5000V
 
AC Voltage
(Test Frequency 50/60Hz)
0~700V
±(2.0%+5)
1V
Phase Sequence
(Test Frequency 40~60Hz)
100V~450V
 
Standard Accessories : Carrying case, Test Leads ,Manual
Dimension :150(H) x 100(W) x 70(D)mm

Additional Information:

• Item Code: 6250IN

Product Details:

• Three test voltages, measure insulation resistance to 20GΩ
• AC voltage measurement to 600V
• Low resistance buzzer
• Data hold, auto range
• Low battery warning
• Complete with test leads,heavy duty carry case and six 1.5V AA batteries

• Model : DIT-2500
• Testing Voltage : 500/1000/2500V
• Resistance : 0~20GΩ ±(3%+5)
• AC V : 700V ±(2%+5)
• Auto Range : yes
• Function Symbol Display : yes
• Data Hold : yes
• Low Resistance Buzzer : yes
• Low Battery Warning : yes
• LCD MAX. Count : 1999

Product Details:

• Selectable multi test voltages 1.00V , 250V , 500V and1000V DC.
• Resistance Measurement up to 2000 M ohms in two ranges 200m0 & 2000MO on all test voltages.
• SHOCK, DROP and DUST proof .
• Special type of Low noise leads to eliminate use of separate guard lead.
• Additional AC voltage measurement function up to 750V AC ( 50 Hz to 500 Hz) sine wave. High Voltage indication by LED for user safety .
• Auto discharge of capacitive load.
• Automatic zeroing, no need to short Earth & Line Terminal.
• Recessed Terminals & Shrouded Leads for enhanced user safety .
• Linear and Accurate reading.
• Long life Re-chargiable battery operated with charger .

Additional Information:

• Item Code: D2K-M

Product Details:

Htc Digital AC Leakage Tester are designed to provide absolutely precise results to the customers and have gained immense appreciation from the customers. Owing to their compact design and vast range, these clamp meters are highly demanded.

Special Features :

• 10uA high resolution
• Large 3 3/4(4000 counts) LCD display
• Auto Power Off
• Shielded transformer jaw opens to 1.2"
• Max/Min, Data Hold, Low battery indication
• Overload protection

Technical Data :

FunctionMax RangeResolutionBasic AccuracyCurrent Ac40mA~100A10uA~100mA±(1.0%+3d)Voltage Ac400V0.1V±(1.5%+10d)Resistance40~400Ω0.1Ω±(1.0%+2d)Continuity TestThreshold 40Ω, Continuity Beeper 2.5KHz

• Standard Accessories : Soft Carrying Case, Test Leads, Manual,
• Dimension : 209(H) x 43(W) x 30(D)mm

Product Details:

• Display: 60 x 32mm LCD
• Max reading: 1999 counts
• Overload Indication: LCD displays “1”
• Low Battery: Low Battery sign on LCD
• Static Consumption: about 10mA, short circuit current: >1.7mA
• Operation Environment: Temperature: 0 ??C - 40 ??C; Humidity:30% -80% RH
• Storage Environment: Temperature: -10 ??C - 50 ??C; Humidity <85%RH

• CPU controlled, simple operation
• Auto data hold
• High voltage output automatically delay for 30s
• Fault protection, buzzer alarms if short circuit
• Equipped with an external DC power supply socket.
• Powered by 4 x 1.5V AAA batteries and by mains 230V AC.
• Dimension: 140 x 100 x 48 mm
• Weight: 500g including Batteries
• Accessories: Main Adaptor, Instructional manual, Test Leads.

• Voltage : 500V
• Range : 100MΩ
• Measurement Range : 20MO~100MΩ
• Resolution : 1MΩ
• Medium Resistance : 20MΩ
• Accuracy : ±(4%+5digits)

Product Details:

Suitable for Use on 230V/50Hz single-phase line (operating voltage: 195~253V); Adopts Micro-Processor Chip to maintain high accuracy, reliability and stability.

Wiring Check: three –LED indication when P-E and P-N green LED are on and red LED is off, the wiring is correct; otherwise it indicates wrong wiring(reverse P and N or bad grounding). Phase Angle Selection: The tests can be performed at positive 0 or negative 180 phase angle.

Over-Load Indication: “OL mS” shows when trip time exceeds Max. test time. Auto Data Hold: The test results will be maintained for a while after the tests finishes. Auto Ramp Test: Test trip current and trip time simultaneously.

Power-Off Warning Indication: The buzzer alarms after operating for 3minutes. Battery Powered. Fused Protection.

Double or Reinforced Insulation for safe design. Trip Current Setting: 10 / 20 / 30 / 100 / 300 / 500mA Confirms to IEC 61010-1 CAT III 300V, IEC 61557-1,5 and IEC 61010-2-31.

Additional Information:

• Item Code: ELCB-1811
• Delivery Time: READY

Product Details:

• Model : HT6510A / HT6510D
• Product info :Digital durometer for shore hardness testing pocket size model with integrated probe
• Test scale :Shore Hardness
• Standards :DIN53505, ASTMD2240, ISO7619, JISK7215
• Parameters displayed :Hardness result, Average value, Max. value
• Measurement range :0-100HA(HD)
• Measurement deviation :1% H
• Resolution :0.1
• Operating conditions :0 o C to 40 o C
• Power supply :4x1.5V AAA (UM-4) battery
• Battery indicator :Low battery indicator
• Dimensions :162 x 65 x 38mm
• Weight (not including probe) :173g

Additional Information:

• Item Code: HT6510A